Kowopro K31

Description

Kowopro K31

Product Information

The Kowopro K31 unit is made of strong grey PVC material. These processors are designed for easy manual processing of x-ray films.  Three tanks at the left for developer, rinse water and fixer are placed in the heating tank bath which can be heated or cooled. The large tank at the right is for final wash of fixed films or also for washing channel hangers. A microprocessor controls heating and water level in heat bath tank and can also be used as a darkroom timer. For permanent fresh water supply in the rinse and end water tank there are separate water taps and over flows. The third tap is for cooling the developer and fixer if necessary.

Specification

• Housing made from 7mm thick PVC
• Water taps for rinse, end wash and heating bath
• microprocessor controller for heating and water level, darkroom timer
• 800w heating

• 25L tank – 410×120×570mm – developer, rinse and fixer
• 110L tank – 393×480×670mm – final wash
• 97×71×93cm (W×D×H)
• 65Kg (Dry)
• 300Kg (When filled)