DR-60 Cleaner

Description

DR-60 Properties

DR-60 is a class 2 cleaner degreaser according to AMS-2644 classification. This product is based a hydrocarbons, it is a very strong solvent action for pre-washing and removing excess penetrant. It is used for the elimination of excess penetrant on the surface when you do not want or cannot use water.

Directions for use:

1. General Cleaning: apply on dirty surface, saturating the contaminated area. Let stand 10-30 seconds, allowing organic soils to dissolve. Wipe with clean rag or towelling before the cleaner dries completely. Repeat if necessary.
2. Penetrant Pre-Cleaning: normally, Sherwin’s other cleaner, DR-62, is recommended for penetrant pre-cleaning. However, it has good pre-cleaning properties and is suitable for this purpose. Before applying penetrant, follow the above instructions for using DR-60 as a general cleaner. Make certain cleaning is sufficient to remove flaws trapped as well as surface soils. Allow it to evaporate completely from within any flaws before applying the
   inspection penetrant.
3. Penetrant Removal: use DR-60 sparingly. Remove as much excess penetrant as possible using clean, dry rag or towelling. Remove remaining penetrant film by wiping with rag or towelling that has been slightly moistened with DR-60. Use a minimum of to avoid flushing penetrant from flaws. Do not spray the product directly on part surface when removing excess penetrant. Rough surfaces require more generous applications of DR-60.

Technical Characteristics

Appearance – Colourless Liquid

Flash Point – 41°C

Temperature Range – 0°C – 50°C

Available in Case of 12x500ml Aerosols.

Request a free quote or view the TDS.