Ardrox 9PR5 Cleaner

Ardrox 9PR5 Cleaner quantity

Add to cart

Add to quote

Product added to quote

View/Send Quote Request

Description

Ardrox 9PR5

Ardrox 9PR5 is a colourless, highly volatile, solvent-based penetrant remover. It is very fast drying and has a low sulphur and halogen content. Ardrox 9PR5 is mainly used for the removal of both visible red dye and fluorescent penetrants. It can also be used as a solvent pre- cleaner prior to the penetrant application for the removal of oil and greases.

Specifications

• EN ISO 3452-2
• AMS 2644
• SAE
• ASME Boiler and Vessel Code section V Article 6

Appearance	Clear, colourless liquid
Density	0.70g/ml @ 20°C
Flash Point	-4°C

Instructions for use

Ardrox 9PR5 is a pre-cleaning solvent

9PR5 should be sprayed directly onto the contamination to be removed. The surface may then require wiping or flushing with the solvent cleaner depending upon the level of contamination to be removed. For best results, the surface should be given a final wipe over with a clean cloth or tissue dampened with Ardrox 9PR5

For the removal of excess penetrant

When Ardrox 9PR5 is used to remove excess penetrant at the end of the penetrant contact time, it is applied to the tested surface using the wipe-off technique. The bulk of the surface excess penetrant is wiped away by using clean, dry absorbent cloth or paper; then 9PR5 is applied to a similar cloth or paper and the tested surface is wiped again until a satisfactory level of background is achieved.

Surface temperature should be between -10°C and 50°C.

Read up on the technical data sheet or receive your free quote here.

Additional information

Manufacturer	Chemetall
Package Size	Aerosol can 400ml, Case of aerosols 10×400ml