Fuji Prescale Film • Fidgeon

Products > >

Request Account

Fuji Prescale Film

Effacer
UGS : ND Catégories : ,

Description

Prescale Film

You can measure pressure, pressure distribution and balance. Fujifilm’s advanced technologies in colour film manufacturing enabled to produce extremely thin and stable Prescale to measure pressure. (Mono-sheet type: 90±5µ; two-sheet type: 110±5µ)
Red patches appear on Prescale when pressure is applied. The colour density changes according to pressure level. (Density: 0.1~1.4) Different kinds of Prescale are supplied to comply with demands to measure a wide pressure range. (0.2~300MPa.)
The entire Prescale functions as a sensor and you can see at a glance the whole pressure distribution on it.

How to use

Prescale is the only such material in the world able to measure pressure, developed by Fujifilm.
Micro-encapsulated colour forming material reacts with the colour developing material to produce red patches on it.

Two-sheet type

(Ultra super low ~ Medium pressure: LLLW ~ MW)

Cut two films appropriately. (A-film in black poly sack and C-film in blue poly sack)
Face the rough surfaces of each film and insert the films where you want to measure pressure. Apply pressure. Take out the films on which red patches have appeared. See and check the pressure distribution.

Mono-sheet type

(Medium & High pressure: MS ~  HHS)

Cut a film in black poly sack appropriately. Insert the film where you want to measure pressure. Apply pressure. Take out the film on which red patches have appeared. See and check the pressure distribution

Working Principle

Structure

Mono-sheet type: The colour-developing material is coated on a polyester base, with the micro-encapsulated colour-forming material layered on top.
Two-sheet type: One film is coated with the micro-encapsulated colour-forming material and the other film is coated with the colour-developing material. Use two films facing the coated sides each other.

How it works

When pressure is applied, the microcapsules are broken and the colour-forming material reacts with the colour-developing material. Red patches appear on the film.

Kinds

Different kinds are supplied according to pressure level. Select appropriate Prescale.

View similar visual inspection products here. For more detailed information click here.

Properties
Two-sheet type Mono-sheet type
Accuracy ±10% or less (when measured with densitometer at 23°C/73.4°F, 65% RH)
Recommended temperature 20°C ~ 35°C (68°F Å`95°F)
Recommended humidity 35%RH ~ 80%RH

Informations complémentaires

Manufacturer

Option

, , , , , , ,

Questions? Ask our specialist team for NDT help or advice