Fleximag Permanent Magnet

Fleximag Permanent Magnet cantidad

Añadir al carrito

Add to quote

Product added to quote

View/Send Quote Request

Descripción

Product information

 The Magnet pole pieces of the Johnson and Allen Fleximag, was designed with Magnetic Particle Inspection in mind, the Fleximag is comprised of 2 separate magnets connected by a heavy duty chain and sheathed by a protective covering.

The design offers unparalleled adjustability in the plane of the magnet. The Fleximag has been specially developed using modern alloys to produce a very high field strength / weight ratio.

The high flexibility is to enable inspection through 3600 is achieved by the Flexigrip handle. This magnet does not require a keeper.

Weight	Magnet: 1Kg
Length	60mm
Height	15mm
Poles	Flexible through 3600
Lift Capacity	>20Kg
Gauss	2700 each pole 7000 with 1.75mm pole spacing

 

Permanent magnets

Permanent magnets are sometimes used for magnetic particle inspection as the source of magnetism. The two primary types of permanent magnets are bar magnets and horseshoe (yoke) magnets.

These industrial magnets are usually very strong and may require significant strength to remove them from a piece of metal. Some permanent magnets require over 50 pounds of force to remove them from the surface.

Because it is difficult to remove the magnets from the component being inspected, and sometimes difficult and dangerous to place the magnets, their use is not particularly popular.

However, permanent magnets are sometimes used by divers for inspection in underwater environments or other areas, such as explosive environments, where electromagnets cannot be used. Permanent magnets can also be made small enough to fit into tight areas where electromagnets might not fit.

Request a free quote today.

Información adicional

Manufacturer	Johnson and Allen