Guide Tube Retort Stand

Option

تحديد أحد الخياراتBoss HeadBurette Clamp 3 prongRetort RodRetort Standإزالة

كمية Guide Tube Retort Stand

إضافة إلى السلة

Add to quote

Product added to quote

View/Send Quote Request

الوصف

Product Information

Guide Tube Retort Stand

A retort stand, sometimes called a clamp stand or a ring stand, is a piece of scientific equipment to which clamps can be attached to hold other pieces of equipment and glassware – for instance, burettes, test tubes and flasks. Accessories such as ring clamps, versatile clamps, 3-prong clamps, and burette clamps can be attached to better hold certain types of glassware. The basic retort stand consists of two main metal pieces: the base and the retort rod.

Boss Head

A Boss head is one of the three things that holds a Florence flask or Conical flask on a retort stand. A Boss head is used to keep the clamp in place so if you put a glass holder in between the clamp it doesn’t fall/break.

Burette Clamp 3 prong

Used to hold apparatus at a fixed 90° angle near the lab frame where no adjustment is required after set-up. Choose single adjustment style for standard use where one prong or “finger” is adjusted using a wing nut, while the other prong remains stationary or for a more versatile clamp choose the dual adjustment style. Utilising thumbscrews, both prongs are easily adjusted over a wider range. Offered in either stainless steel or nickel plated zinc. Supplied with non-slip vinyl sleeves or for temperatures above 100°C, fiberglass covers.

View similar darkroom accessories.

Additional Supplier Information.

معلومات إضافية

Option	Boss Head, Burette Clamp 3 prong, Retort Rod, Retort Stand