Ardrox 907PB

Package Size

تحديد أحد الخياراتBulk 200LBulk 25Lإزالة

كمية Ardrox 907PB

إضافة إلى السلة

Add to quote

Product added to quote

View/Send Quote Request

الوصف

Product Information

Water-washable red penetrant

Ardrox 907PB is a water washable red dye penetrant. It is used e.g. in non-destructive testing of forged parts, welds, casts and drop forged parts.

Specification

• EN ISO 3452-2
• ASME Code V Article 6.
• SAE AMS 2644

Appearance	Dark red mobile liquid
Density	0.87g/ml @ 20°C
Flash Point	93°C

Instructions for use

Ardrox 907PB may be applied by aerosol, brushing, flow-on, immersion, spray or by swab.

Pre-cleaning and drying

Clean part with cleaner (9PR5 or equivalent) before applying Ardrox 907PB penetrant. Apply cleaner to the part and wipe clean with cloth. Surface has to be free of grease, oil and dirt. Allow part to dry before applying penetrant.

Penetrant application

Surface temperature should be between -10 and 50°C

Apply a thin even film of Ardrox 907PB penetrant to cover test area. Allow penetrant 10-30 minutes penetration time before removing.

Penetrant removal 

Remove excess surface penetrant with clean cloths, pre-moistened with cleaner (eg. 9PR5). Alternatively removal can be effected by rinsing with water (for application over 5°C). Do not flush surface with cleaner as sensitivity will be impaired. Repeat procedure until surface with cleaner as sensitivity will be impaired. Repeat procedure until surface penetrant has been removed.

Developer

Shake developer (eg. 9D1B) thoroughly. Spray an even developer film over area to be inspected. Allow 10-30 minutes developing time before evaluation.

Read up on the technical data sheet or request a free quote here,

معلومات إضافية

Manufacturer	Chemetall
Package Size	Bulk 200L, Bulk 25L, علبة رذاذ 400ml, حالة من الهباء الجوي 10×400ml